Setting Of The Osd Language; Connecting Other Equipment; Connecting To The Rear Av1 Input Jacks - Sanyo CA21FS2 Instruction Manual

Setting of the OSD (On Screen Display) Language
1
Press the MENU button for MAIN menu dis
play.
PICTURE
AUDIO
PRESET
LANGUAGE
2
Select "LANGUAGE " by pressing the
Programme UP or DOWN button.
PICTURE
AUDIO
PRESET
LANGUAGE
3
Press the VOLUME + or - button for
Language menu display.

Connecting to the Rear AV1 Input Jacks

You may connect the audio and video output terminals of the DVD player or VIDEO recorder to the input
terminals of the TV set to enjoy the DVD and VIDEO programs.
INPUT
/DVD
VIDEO
■ To watch video input picture, select AV1 position by pressing the TV/AV Selector.
When the audio signal from the VCR is stereo, be sure to connect the right and left channels to the respec-
tive right and left AUDIO IN terminals. Then select "STEREO" channel of the audio channel in the TV set
with the remote control
A B
Each time the
When the stereo signal is inputted from the right and left audio input terminals, each time the
SURROUND button is pressed (or selection of On-screen Menu), surround mode is changed as follows;
" SURROUND ON", and "SURROUND OFF".
■ If the external equipment is a monaural one, connect it to the left terminal of AUDIO IN.
Note: The effect of surround is not obtained although the switching of surround is displayed in this
monaural connection.
MONITOR OUT
R R
(MONO)
L L
V
I
D
E
O
A B
button.
button is pressed, the AV Stereo mode is changed as follow,
STEREO
SURROUND
ENGLISH
VIETNAMESE
y
P CC N N
FRANCAIS
BAHASA INDONESIA
Select "ENGLISH", "
y C
" ", "FRANÇAIS", "BAHASA INDONE-
P C N N
SIA" by pressing the Progamme UP or DOWN
button. To return to the normal TV mode, press
the MENU button.
4
Press the MENU button to return to normal
TV display.

Connecting other Equipment

PLAYBACK
To Audio Output (Right)
To Audio Output (Left)
To Video Output
M O N O
SURROUND
OFF
", "VIETNAMESE",
VCR
AV1
ON
13