Maintenance - Access Interfacing Solutions LSR110 Product Manual

Table 1. Troubleshoot the LSR116
Problem
LSR116 not transmitting data to
host
LSR116 cannot scan barcode

3.10 Maintenance

3.10.1 Cleaning
Clean the glass with a lint-free cloth. If the glass is dirty, wipe the glass with a lint-free cloth
moistened with isopropyl alcohol or use an alcohol wipe. Do not use abrasive cleaners.
3.10.2 Storage
Store the unit in its original box, at a temperature of -30ºC to 70ºC.
Page 10 of 33
Solution
Check that all cable connections between the LSR116 and
host are secure.
Ensure that the unit has power.
Ensure that the unit is configured to read the barcode that
you are scanning.
If scanning a document, ensure that the print quality is
good.
If scanning a barcode on a mobile phone, ensure that you
set the screen backlight on the phone to its brightest
setting.
Copyright © Access-IS 2020