Table of Contents
Advertisement
Maintenance
Checking and Changing engine oil
• Checking engine oil
Remove engine oil dip stick cap (1).
Check oil level on dipstick. Add oil
if below 3/4 full. Refer to page 13 for
correct engine oil type.
• Changing engine oil
To drain old engine oil, place catch
basin under engine and unscrew
drain plug (2) located on bottom left
side of engine. Drain engine oil into
proper catch basin. Dispose of oil
properly at oil reclaim facility.
• Cleaning oil filter
Drain engine oil per instructions above.
Remove oil filter plug (2) located at bottom
right side of engine. Remove screen filter
(3) from spring assembly. Clean screen
with solvent. Re-install filter and refill with
0.5 qt. oil. Refer to page 13 for correct engine
oil type.
CAUTION
Never start the engine when there is
insufficient lubricating oil. Otherwise,
it will cause harm to the engine.
1
2
22
3
Advertisement
Table of Contents
