Table of Contents
Advertisement
Maintenance (continued)
Brakes
FRONT HYDRAULIC DISK BRAKE INSPECTION
1
1. Inspect front disk brake caliper (1) for leakage. If brake fluid leaks, the
safety of riding could be affected.
2. Inspect the brake hose (2) for cracks, and the joint for leakage.
3. Check the brake fluid level through the sight gauge on front of brake fluid
reservoir (3). If level is at or below the LOWER mark, inspect brake pads for
wear and hydraulic system for leaks.
4. To add brake fluid, unscrew the 2 screws (4) on top of the brake fluid
container located on right handlebar. Add DOT3 or DOT4 brake fluid. Do not
mix brake fluid types.
ADJUSTMENT OF REAR BRAKE
2
1.
To make rear break adjustment,
1
turn rear adjusting nut (1)
clockwise to increase and
counterclockwise to reduce
tension on the brake cable.
2.
Brake shoes should be replaced
by a qualified service technician
once worn.
25
4
3
Advertisement
Table of Contents
