Using The Air Purifier; Understanding The Air Quality Light; Turning On And Off; Changing The Fan Speed - Philips AC1214/10R1 User Manual

4 Using the air
purifier
Understanding the air
quality light
Air quality light color
Blue
Blue-Purple
Purple-Red
Red
The air quality light automatically goes
on when the air purifier is switched on,
and lights up all colors in sequence.
After approximately 30 seconds, the
air quality sensors select the color that
corresponds to the surrounding air
quality of airborne particles.

Turning on and off

Note
• Always place the air purifier on a
stable, horizontal, and level surface
with the front of the unit facing
away from walls or furniture.
• For optimum purification
performance, close doors and
windows.
• Keep curtains away from the air inlet
or air outlet.
1
Put the plug of the air purifier in the
power socket.
2
Touch to switch on the air purifier
(Fig. j).
» The air purifier beeps.
Air quality level
Good
Fair
Poor
Very poor
» The air purifier operates under
the auto-purification mode by
default.
» When the air purifier is warming
up, " " displays on the screen.
» After measuring the air
quality for approximately
30 seconds, the air quality
sensor automatically selects
the appropriate air quality light
color.
3
Touch and hold
switch off the air purifier.
Note
• If the air purifier stays connected
to the electrical outlet after turning
OFF, the air purifier will operate
under the previous settings when
turned ON again.
• If the air purifier accidentally
shuts off during running, it restarts
automatically and operates under
previous settings when the power
supply is resumed.

Changing the fan speed

There are several fan speeds available.
You can choose the auto-purification
mode, speed 1, 2, 3 or turbo mode (t).
Auto-purification mode
•
Touch the fan speed button
repeatedly to select the auto-
purification mode (Fig. k).
for 3 seconds to
EN 7