Power Supply - Panasonic SV-AV30 Operating Instructions Manual

Power Supply

ª Using AC Adaptor
1
Connect the AC Adaptor to AC Main
socket.
2
Connect the DC Input Lead to the [DC IN
4.8V] socket on the SD Multi AV Device.
THE SOCKET OUTLET SHALL BE
INSTALLED NEAR THE EQUIPMENT AND
SHALL BE EASILY ACCESSIBLE
ª Charging the Battery
1
While holding the [
it to remove the Battery Compartment
Cover.
2
Press the terminals of the battery onto
the terminals of the Battery
Compartment and set the battery.
≥Fit the battery with its label facing upward.
≥After the battery is set, close the cover.
3
Connect the AC Adaptor to AC Main
socket.
4
Connect the DC Input Lead to the [DC IN
4.8V] socket on the SD Multi AV Device.
≥Power Lamp 1 flashes, and Charging starts.
≥When recharging, turn the power of the SD Multi
AV Device off.
5
Wait until Power Lamp
≥When recharging is completed, Power Lamp
goes off.
≥If the Power Lamp flashes quickly (or slowly) when
recharging, recharging is not normal. (l 55)
10
.
] part, slide
goes off.
1
1
DC IN 4.8V
1
2
3
DC IN 4.8V
2
1
4