Charge The Built-In Battery For Maintaining The Date Information; After Use - Panasonic SV-AV30 Operating Instructions Manual

Charge the built-in battery
for maintaining the date
information
This built-in battery is used for the memory of date
and time. If [PRESS MENU TO SET CLOCK] is
displayed when the power is on, the built-in battery
may be exhausted. Charge using the following
procedure:
1
Take the battery out and plug in the AC
l
adaptor. ( 10)
2
Turn the power off and leave the SD Multi
AV Device as it is for approx. 12 hours.
≥After recharging the built-in battery, adjust the date
and time. (l 17)
≥Even if the built-in battery is not run down, [PRESS
MENU TO SET CLOCK] is displayed at the time of
purchase.

After Use

1
Turn off the SD Multi AV Device.
2
Take out the Memory Card. (
3
Detach the power supply and retract the
LCD Monitor
.
4
Put the SD Multi AV Device into the
Wearable Carry Case.
Others
l
1
2
11)
DC IN 4.8V
OFF PLAY REC
49