Turning The Power On/Selecting Operation Modes - Panasonic SV-AV30 Operating Instructions Manual

Turning the Power On/
Selecting Operation Modes
Select a desired mode on the mode selection screen.
1
Set the Power/Mode Switch to [PLAY] or
[REC].
≥The SD Multi AV Device is turned on.
2
Set to [REC] to select Record Mode.
Set to [PLAY] to select Play Mode.
3
Press the [MODE] Button to select a
Operation Mode.
≥Every time the [MODE] Button is pressed, the
Operation Mode changes as follows.
≥After several seconds, only icons are displayed.
1
[REC] mode
[PICTURE]l[MPEG4]l[VOICE]l[PICTURE]
[PLAY] mode
[PICTURE]l[MPEG4]l[VOICE]l[MUSIC]l
[PICTURE]
ª About the Operation Modes
Seven operation modes are provided as follows.
≥Still picture (JPEG format still picture) record mode
(l 20)
≥Still picture (JPEG format still picture) play mode
(l 21)
≥Moving picture (MPEG4 format) record mode
(l 22)
≥Moving picture (MPEG4 format) play mode (l 23)
≥Sound (VOICE format) record mode (l 24)
≥Sound (VOICE format) play mode (l 25)
≥Music (MPEG2-AAC/MP3 format) play mode (l 26)
1 1
OFF
2
PLAY REC
OFF
3
MODE
1
REC
PLAY
13