Speaker Setting - Panasonic DVD-H2000 Operating Instructions Manual

POWER
TV/AV
POWER OPEN/CLOSE
Joystick/
GROUP
ENTER
PAGE
SUBTITLE
SKIP
STOP
1
4
Front (L)
a
ACTION
L
Exit
Exit
Test
SELECT
Test
LS
signal
ENTER RETURN
Surround
(L)a (L)c
A
No
Large
B
L
C
d
LS
Center speaker
Difference
Approx. 50 cm (1 1 / feet)
2
Approx. 100 cm (3 feet)
Approx. 150 cm (5 feet)
Approx. 200 cm (6 feet)
Surround speakers
Difference
Approx. 200 cm (6 feet)
Approx. 400 cm (12 feet)
Approx. 600 cm (18 feet)
TV
CH VOL
ENTER MARKER
RETURN
AUDIO
SLOW/SEARCH
PAUSE PLAY
2 3
5 6
Center
Front (R)
b a c a
R
m s C d B
0 0
d B
SW
0
d B m s d B
RS
0 0 0
Subwoofer
b
(R)c (R)a c a
LS LS
Small
R
e
SW
f
RS
Setting
1.3 ms
2.6 ms
3.9 ms
5.3 ms
Setting
5.3 ms
10.6 ms
15.9 ms
Changing settings

Speaker setting

Change speaker size and presence
balance to suit the speakers you have connected.
These settings are not necessary when you select "2-channel"
(only two speakers are connected).
Speaker presence and size ( )
A
1. Use the joystick [ , , ,
[ENTER].
2. Move the joystick [ , ] to select the setting and press
[ENTER].
Icon examples: Surround speaker (L)
Large: When the speaker supports low-frequency (under 100 Hz)
reproduction.
Small: Select when the speaker does not support low-frequency re-
production.
The size setting for the front speakers is automatically determined
by the setting for the subwoofer.
Delay time ( )
B
(Dolby Digital, center and surround speakers only)
For optimum listening with 5.1-channel sound, all the speakers, ex-
cept for the subwoofer, should be the same distance from the seat-
ing position. If you have to place the center or surround speakers
closer to the seating position, adjust the delay time to make up for
the difference.
If distance (from the center speaker) and
speakers) are the same as or greater than
ers), leave the delay time as "0", the factory preset.
If either distance or is less than
relevant table and change to the recommended setting.
Changing the delay time
1. Use the joystick [ , ,
and press [ENTER].
2. Move the joystick [ , ] to adjust the delay time and press
[ENTER].
Channel balance ( )
1. Use the joystick [ , ,
[ENTER].
A test signal is output from one speaker at a time, starting with
the front left speaker and proceeding clockwise.
FRONT (L)_--)CENTER_--)FRONT (R)
e
SURROUND (L)(-------------==SURROUND (R)
2. While listening to the test signal, move the joystick [ ,
to adjust the volume of the center and surround speakers so
they are the same apparent volume as the front speakers.
(The front speakers cannot be adjusted here.)
3. Press [ENTER].
The test signal stops.
Note
No signal is output for the subwoofer. To adjust its volume, play
something, then return to this screen to adjust to suit your taste.
When you are finished
Use the joystick [ , , , ] to select "Exit" and press [ENTER].
Note
The unit may be unable to output as set here due to limitations im-
posed by the unit itself or the disc being played. (The FL display's
"P.PCM" indicator lights or "D.MIX" indicator goes out in these
cases.)
, delay time , and channel
] to select the item and press
(from the surround
(from the front speak-
, find the difference in the
, ] to select the delay time box
, ] to select "Test" and press
v
]
33
RQT5741