Connecting An Analog Amplifier Or System Component; Connecting A Digital Amplifier Or System Component; Recording To Mds Or Cassette Tapes - Panasonic DVD-H2000 Operating Instructions Manual

Connecting an analog amplifier or
C
system component
Audio cable
White (L)
Red (R)
AC IN
AUDIO OUT
5.1 ch
DIGITAL AUDIO OUT
T
OPTICAL COAXIAL SUB- CENTER SURROUND R/ L/
WOOFER FRONT R FRONT L
R L
(PCM/BITSTREAM)
To enjoy Dolby Pro Logic
If you connect an amplifier that can decode Dolby Pro Logic, you will also need to connect center and surround speakers to enjoy
surround sound. Read the instructions for the equipment for connection details.
Turn Advanced Surround off (➡ page 23). Dolby Pro Logic will not function correctly if Advanced Surround is on.

Recording to MDs or cassette tapes

Analog recording
You can record to an MD or cassette deck. Using analog connection
means sound will be unaffected by the copy guards found on DVDs.
To make an analog recording
Connect the recording equipment with an audio cable (➡ [C] above).
Back of the unit
AUDIO OUT
2 ch
R L
2 ch
L
R
AUX IN
Amplifier or system component
Connecting a digital amplifier or
D
system component
Note when connecting the optical digital audio cable
Remove the
dust cap
Note
Keep the dust cap and reattach when not using the terminal.
480P COMPONENT VIDEO OUT
Y P P
B R
COMPONENT VIDEO OUT VIDEO OUT
S VIDEO OUT OPTICAL
Y P P
B R
OPTICAL COAXIAL
Change "Digital output" (➡ page 34).
Digital recording
You can record the digital signal directly onto an MD.
The signals on DVDs will be converted to 48 kHz/16 bit linear PCM.
Ensure the following conditions are met.
There is no copy guard recorded on the disc.
The recording equipment can handle a sampling frequency of
48 kHz/16 bit.
To make a digital recording
1. Connect the recording equipment with an optical or coaxial digit-
al audio cable (➡ [D] above).
2. When recording DVDs, make the following settings.
ADVANCED SURROUND
Digital Audio Output: On (RE-MASTER Off) (➡ page 31)
PCM Down Conversion: Yes (➡ page 34)
Dolby Digital/DTS Digital Surround: PCM (➡ page 34)
Align the plug with the
terminal
Back of the unit
AC IN
AUDIO OUT
5.1 ch 2 ch
DIGITAL AUDIO OUT
COAXIAL SUB- CENTER SURROUND R/ L/
WOOFER FRONT R FRONT L
R L
(PCM/BITSTREAM)
Optical digital
or
audio cable
Do not bend
when
connecting.
Coaxial cable
: OFF (➡ page 23)
37
RQT5741