Marking Places To Play Again-Marker - Panasonic DVD-H2000 Operating Instructions Manual

2·2
CANCEL
A
1
MARKER
2
MARKER
B
1
MARKER
2
ENTER
MARKER
16
RQT5741
TV
CH VOL
POWER
TV/AV
POWER OPEN/CLOSE
1·2
GROUP ENTER
MARKER
PAGE RETURN
1·2
SUBTITLE AUDIO
SKIP SLOW/SEARCH
STOP PAUSE PLAY
RETURN
1 2 3
4 5 6
7 8 9
CANCEL
0 > 10
=
AUDIO
HP-V.S.S. SP-V.S.S. ONLY ANGLE
REPEAT A-B PLAY
TEXT MODE REPEAT MODE
ACTION
✱ ✱ ✱ ✱ ✱
✱ ✱ ✱ ✱
1
✱ ✱ ✱ ✱ ✱ ✱ ✱ ✱ ✱ ✱
1−10
✱ ✱ ✱ ✱ ✱ ✱ ✱ ✱ ✱ ✱
1–10
✱ ✱ ✱ ✱ ✱ ✱ ✱ ✱ ✱
1–10 1
Marking places to play
again—MARKER
Remote control only
You can mark specific points on a disc to return to later. This feature
only works if the elapsed playing time of the disc is shown on the
unit's display.
1
Press [MARKER].
The marker icon appears.
2
Press [MARKER] at the point you want
to mark.
To select another marker, move the joystick [ ].
You can mark up to 999 points.
Press [MARKER].
The marker icon appears and if the disc already has markers,
they are displayed.
Move the joystick [ ] to highlight the
first marker, then press [MARKER] at
the point you want to mark.
To mark the eleventh point and beyond
Select the next group of 10 as follows.
1. Move the joystick [ , ] to highlight the marker pin icon.
2. Move the joystick [ ] to select "11–20".
You can select the next group of 10 when the current group is full.
To clear the marker display
Press [RETURN].
To play from a marked position
Move the joystick [ , ] to select a marker number and press
[ENTER].
To clear a marker
Move the joystick [ , ] to select a marker number and press
[CANCEL].
You can clear existing markers, but they are restored when you
open the disc tray or switch the unit to standby.
Note
All the markers added with this unit are cleared when the unit is
switched to standby or the disc tray is opened.
This feature doesn't work while using a play list.
The markers are ordered by time. This means that the marker
numbers can change when you add and erase markers.
Marker pin icon
1–10
1 2 3 4 5 6 7 8 9 10
✱ ✱ ✱ ✱ ✱ ✱ ✱ ✱ ✱ ✱
11–20