Connecting An Amplifier With 5.1-Channel Audio Input Terminals; Connecting An Amplifier With A Built-In Decoder Or A Decoder- Amplifier Combination - Panasonic DVD-H2000 Operating Instructions Manual

Home Theater
Connecting an amplifier with
A
5.1-channel audio input terminals
Audio cable
White (L)
Red (R)
480P COMPONENT VIDEO OUT
Y P P
B R
COMPONENT VIDEO OUT VIDEO OUT
Y P P
B R
SUB-
WOOFER
Change "Speaker setting" (➡ page 33).
Note
Turn speaker and headphone V.S.S. (➡ page 23) off when you
connect through the 5.1-channel output terminals. The unit does
not output the signals for channels other than the front speakers
when V.S.S. is on.
36
If you do not connect a subwoofer, it is advisable to connect front
speakers (L/R) capable of producing bass of less than 100 Hz.
RQT5741
—Enjoying more powerful sound
Back of the unit
AC IN
AUDIO OUT
5.1 ch
DIGITAL AUDIO OUT
S VIDEO OUT OPTICAL COAXIAL SUB- CENTER SURROUND
WOOFER
R L
(PCM/BITSTREAM)
CENTER SURROUND
(R) (L)
Speakers
You can enjoy surround sound by connecting
from three to six speakers.
Example: Six speakers
Connecting an amplifier with a
built-in decoder or a decoder-
B
amplifier combination
Note when connecting the optical digital audio cable
Note
Keep the dust cap and reattach when not using the terminal.
480P COMPONENT VIDEO OUT
2 ch
COMPONENT VIDEO OUT
R/ L/
FRONT R FRONT L
Y
Connect cables to
terminals
corresponding to the
speakers you have
connected.
FRONT
(R) (L)
Amplifier
Change "Digital output" (➡ page 34).
Note
You cannot use DTS Digital Surround decoders not suited to
DVD-Video.
Align the plug with the
Remove the
terminal
dust cap
Y P P
B R
VIDEO OUT DIGITAL AUDIO OUT
S VIDEO OUT OPTICAL COAXIAL SUB-
WOOFER
P P
B R
(PCM/BITSTREAM)
or
OPTICAL COAXIAL
Back of the unit
AC IN
AUDIO OUT
5.1 ch 2 ch
CENTER SURROUND R/ L/
FRONT R FRONT L
R L
Optical digital
audio cable
Do not bend
when connecting.
Coaxial cable