Direct Recording To Hdd - Sharp HR480F Operation Manual

HR480F_GB-036-044
All manuals and user guides at all-guides.com
High-Speed Dubbing Priority
(Page 59)
• This Recorder has a high-speed dubbing
function. The High-Speed Dubbing Priority
function can be used when dubbing from
HDD to video format DVD.
• This setting must be specified in advance
when performing high-speed dubbing from
HDD to an DVD-R or video format DVD-RW
disc.
• If you set high-speed dubbing priority,
there will be restrictions, such as the
inability to edit at the frame level, when you
edit the video.
* When performing high-speed dubbing to a
VR format DVD-RW disc, this setting is not
necessary.
Chasing Playback (Page 37)
• This lets you playback and watch a
programme from the beginning while it is
being recorded on HDD.
Simultaneous Recording/
Playback (Page 79)
• This lets you playback and watch a
programme recorded on HDD, or a DVD or
CD, while recording another programme on
HDD.
• You can use the HDD playback function
even while you record another broadcast to
DVD or a programmed recording to DVD is
performed.
Cutting out Commercials
(Pages 83, 92)
• After recording is finished, you can cut out
commercials and other unnecessary
scenes by calling up the "ERASE SCENE"
function.
(Commercials cannot be cut out automati-
cally during recording.)
• With video recorded to a video format DVD-
RW/R, it is not possible to erase scenes.
Tamper Proof
• You can set Tamper Proof to prevent
operations by mistake during recording or
timer recording.
1 Press and hold TAMPER PROOF (RGB
OFF and ON SCREEN together) for
more than 2 seconds.
2 Each time you perform this operation,
the function is activated or deactivated.
• If you try to operate the Recorder while
Tamper Proof is set, " " blinks in the front
display panel and tells you that Tamper
Proof is set.
39
Recording to HDD

Direct Recording to HDD

HDD
Explained below is the standard procedure
for recording the programme being viewed
onto HDD.
• A maximum of 12 hours can be recorded
onto HDD in one direct recording session.
• A maximum of 199 programmes can be
recorded (saved) onto HDD.
NOTE
• The content being recorded will not be
successfully recorded if power failure
occurs or if power cord is accidentally
unplugged.
* Also direct recording to a DVD-RW/R is
possible. (Page 41)
• Video for which recording is prohibited
cannot be recorded.
Preparation for Direct Recording
• Perform "CLOCK SETTING" and
"CHANNEL SETTING". (Pages 29-31)
• When you record NICAM broadcast, set
"NICAM" setting to "AUTO". (Page 108)
• When recording to the HDD, the recorded
data is the same as that recorded to a
DVD-RW in VR mode.
• After recording a programme on your HDD,
when you want to dub (copy) it to a video
format DVD-RW/R without degrading the
image quality, set the "HI SP DUB SET-
TING" to "YES". (Pages 59, 104)
1
Press HDD to select HDD mode .
• The HDD mode indicator in the front
panel display appears.
• HDD mode is selected automatically
when the power is turned on.
2
Press the Number buttons or
CH' / " to select the channel to
be recorded.
3
Press REC MODE to select the
recording mode.
• The recording mode changes as
shown below each time the button is
pressed.
XP SP LP EP
• Recording mode set by selecting
"MNgg" is the recording mode set
on the "REC MODE SETTING" screen
(page 44).
05.3.23, 1:48 PM
MNgg
39
GB