Sharp HR480F Operation Manual page 49

HR480F_GB-045-057
All manuals and user guides at all-guides.com
Timer Recording/The GUIDE Plus+
2
Press GUIDE to display the
GUIDE Plus+ setup menu screen.
• Confirm the settings for "Language"
and "Country" and edit them if
necessary.
3
Press ' / " to select "Postal
Code". Press SET/ENTER, then
press ' / " / \ / | to enter your
postal code. Then, using ' / " ,
select "External Receiver 1" and set
the details. Select (1) your recep-
tion (terrestrial, cable or satellite),
(2) your provider, (3) the brand of
your external receiver and (4) the
terminal which your external
receiver is plugged into (SCART 2).
• The Recorder will now try to commu-
nicate with your external receiver via
the G-LINK cable. The display
message will ask you if the receiver
has changed to a specified channel.
4
If the external tuner changed
channels correctly, press ' / " to
select "YES" and press SET/
ENTER. Then press GUIDE to
exit the setup menu.
• If the external receiver did NOT
change channels, or if your receiver
brand is not included in the on-screen
list, go to Alternate Setup (See page
48).
5
Tune your external receiver
manually to your Host Channel.
Leave your external receiver "ON"
overnight and leave the Recorder
in "STANDBY" overnight to scan
and receive the TV listings data.
• See the following table for Host
Channels in your country. The table
may be updated from time to time.
For updates, see the GUIDE Plus+
website: www.europe.guideplus.com
• If your external receiver is "OFF"
when you try to receive data the
GUIDE Plus+ system cannot receive
any data.
• All other actions than the "scanning
(automatic receiving of data)", such
as "recording" or "watching" have
priority over the "scanning", and will
prevent it.
• All future downloads will happen
automatically.
47
®
Host Channels in France
Canal+
(Analogue only)
NOTE
• Even if you live in a country where there is
a Host Channel, if you cannot be receive
data from any Host Channel, change the
setting of your country to "Other." Scanning
of the Host Channel will not be started.
• If the Recorder programme number in the
Editor screen and that of the external
receiver are unmatched after the first TV
listings data download, please change the
unmatched programme number on the
Editor screen manually to match it with that
of the external receiver. Otherwise the
Recorder will not tune to the correct
programme number for the next TV listings
data download.
6
On the next day, press GUIDE to
confirm that your first data
download has been completed.
• If certain channels are missing, or if
you see channels that you do not
receive, press ' ' ' ' ' / | | | | | a few times to
display the "Editor" screen. Then
press ' ' ' ' ' / " " " " " to select a channel to
edit, and turn "ON" or "OFF" the
channels according to what you
receive in your home.
05.5.13, 1:00 PM
System
47
GB