Sharp HR480F Operation Manual page 127

G-LINK jack
GUIDE Plus+
High Speed
Dubbing Prior-
ity
HOST CHAN-
NEL
Initialisation
Letter Box
4:3 LB
Linear PCM
Sound
MP3
Multi Angle
Multi Audio
My TV
Original
Pan Scan
4:3 PS
Parental Con-
trol
Play List
Playback
Control (PBC)
Rate Conver-
sion Dubbing
HR480F_GB-117-127
All manuals and user guides at all-guides.com
This is a jack in the back of the Recorder to connect Infrared transmitter through G-LINK
cable so that you can control your external receiver from the Recorder.
An interactive on-screen television programming guide. You can set timer recording
easily with one-touch from an electronic programme listing table.
This function lets you perform high speed dubbing to a DVD even in Video mode after
recording, by setting "HI SP DUB SETTING" to "YES" when recording to HDD.
This is a channel from which you can download the GUIDE Plus+ TV listing data. You
should tune in to the Host Channel in your country.
This allows you to use the HDD or a DVD-RW disc in this Recorder. If you initialise a
disc, all of the programmes recorded on it are erased.
Screen size that cuts off the top and bottom of the image to allow playing of wide-
screen (16:9) software on a connected 4:3 TV.
Linear PCM is a signal recording format used for Audio CDs.
The sound on Audio CDs is recorded at 44.1 kHz with 16 bits. (On DVD discs, sound is
recorded at between 48 kHz with 16 bits and 96 kHz with 24 bits.)
One type of audio compression that uses MPEG1. This format compresses sound to
about 1/10, without impairing the original sound quality.
This is a feature of DVD video discs. In some discs, the same picture is shot from
different angles, and these are stored in a single disc so you can enjoy playback from
different angles. (This function can be enjoyed if the disc is recorded with multiple
angles.)
This is a feature of DVD video discs. This function makes it possible to record multiple
different audio tracks for the same video, so you can enhance your enjoyment by switch-
ing audio. (You can enjoy this function with discs recorded with multiple audio tracks.)
This is a feature of the GUIDE Plus+ system. You can define your personal profile
according to which the system automatically scan the TV listings data to make recom-
mendations to you.
A video (title) recorded from a TV broadcast or external input is called an "Original".
Screen size that cuts off the sides of the image to allow playing of wide-screen (16:9)
software on a connected 4:3 TV.
In some digital broadcasts and DVD video discs, a control level for disc viewing is set
depending on the age of the viewer. With this Recorder, you can set the control level for
viewing such broadcasts and discs.
A set of titles created by copying just the needed scenes from original titles is called a
"Play List". (The original titles remain as they are.)
This information is recorded on video CDs (version 2.0). This allows you to actively
select the sections to be viewed or listened to, using a menu displayed on the TV.
This function is used to select the picture quality of dubbed titles at the time of dubbing.
125
Glossary
Continued on Next Page |||
05.3.23, 2:09 PM
125
GB