Function Setting; Functions Under Other Settings; Rec Function - Sharp HR480F Operation Manual

Function Setting

Functions under OTHER SETTINGS

This section explains various settings relating to recording and playback which can be used to get more out of the Recorder.
• For details about each setting, see the corresponding pages.
REC FUNCTION s page 104
VIEW/PLAY SET s page 107

REC FUNCTION

REC MODE SETTING
• If you set by selecting one of the 32 picture quality levels for "MN", recording will be
done at that picture quality when "MN" is selected using REC MODE on the remote
control. For details, see page 43.
AUDIO REC TYPE SET
• LINEAR PCM: If you record by setting the recording mode to "XP" or "MN32", you can
record audio as PCM (uncompressed) audio which can be played back with 2ch audio
equipment.
* This will not work when recording with the recording mode set to anything other than
"XP" or "MN32".
* Recording is done with a recording mode whose image quality is slightly lower than
XP mode recorded with the "Dolby Digital 2ch" setting.
* When making a PCM recording of bilingual sound, only the audio selected in
"BILINGUAL SETTING" is recorded.
• Dolby Digital 2ch: Records audio as Dolby Digital 2ch audio.
* Dolby ® Digital Stereo Creator enables consumers to create stereo DVD-Videos with
stunning Dolby Digital sound tracks at home. The technology, when utilised instead
of PCM recording, also saves recordable disc space, allowing for higher video
resolution or extended recording time on each DVD, DVDs mastered using Dolby
Digital Stereo Creator will play back on all DVD-Video players.
EXTERNAL IN AUDIO
• This selects audio to be input from an external device.
* Be sure to always select "BILINGUAL" when recording bilingual sound. If you select
"STEREO" when recording, the audio for the left channel ("L CH") and right channel
("R CH") will be heard together during playback.
* When recording bilingual sound, you can switch between the left channel ("L CH")
and right channel ("R CH") during playback in VR mode. In Video mode, only the
audio set in "BILINGUAL SETTING" is recorded.
BILINGUAL SETTING
• This selects whether to record the left channel ("L CH") or right channel ("R CH") when
recording (or dubbing) bilingual sound to DVD-RW/R in Video mode or when recording
to HDD with "HI SP DUB SETTING" set as "YES".
* This does not apply when recording from the DV IN terminal. (DV IN terminal is for
DV-HR480F/DV-HR450F only)
AUTO CHAPTER SETTING
• This sets the interval of automatic chapter setting during recording.
• Chapter markers set on a DVD-RW/R in Video mode cannot be combined by editing,
so select an appropriate interval.
HI SP DUB SETTING
• To perform high speed dubbing from the HDD to a DVD in Video mode, set this to
"YES" before recording to the HDD.
• If you wish to edit in frame units, set this to "NO". For details of "HI SP DUB SETTING",
refer to page 59.
104
GB
HR480F_GB-104-106
All manuals and user guides at all-guides.com
ADJUSTMENT s page 111
CONTROL SET s page 115
(AUDIO REC TYPE SETTING)
(EXTERNAL INPUT AUDIO SETTING)
(HIGH SPEED DUBBING SETTING)
104
32 levels
LINEAR PCM
Dolby Digital 2ch
STEREO
BILINGUAL
L CH
R CH
10 (10 min interval)
15 (15 min interval)
30 (30 min interval)
–– (off)
YES
NO
05.3.23, 2:07 PM