On(G)/Standby(R) Indicator - Panasonic PT-VW431DEA Operating Instructions Manual

Powering ON/OFF

ON(G)/STANDBY(R) indicator

The ON(G)/STANDBY(R) indicator informs you the status of the power. Confirm the status of the
<ON(G)/STANDBY(R)> indicator before operating the projector.
Indicator status
No illumination or flashing
RED
ORANGE Flashing
GREEN
Flashing
26
- ENGLISH
ON(G)/STANDBY(R) indicator
The power cord is unplugged.
The power cord is plugged.
Lit
The projector is in stand-by mode, after the cooling is completed.
The projector is cooling down. The projector cannot be turned on until cooling is
completed and the <ON(G)/STANDBY(R)> indicator stops blinking.
The temperature inside the projector is abnormally high. And the <WARNING>
indicator also blinks in red (
cooling is completed and the <ON(G)/STANDBY(R)> indicator stops blinking.
Lit Projecting.
The projector is in stand-by status with Power management function.
The projection lamp will be turned on if the input signal is reconnected or any
button on the control panel or remote control is pressed. (
Status
Æ page 77). The projector cannot be turned on until
Æ
page 53)