Rear Terminals - Panasonic PT-VW431DEA Operating Instructions Manual

About Your Projector

Rear terminals

(5)
(1) COMPUTER 1 IN / COMPONENT IN
Connects to COMPUTER 1 IN/ COMPONENT
IN input signals.
(2) COMPUTER 2 IN / MONITOR OUT
Connects to COMPUTER 2 IN/ MONITOR OUT
input signals or outputs the analog RGB signals
input the projector.
(3) HDMI IN
Connects to HDMI input signals.
(4) LAN / DIGITAL LINK
Connects to a LAN cable for network
connection; or connects to a LAN cable for
video and audio connection without complex
cable connections.
(5) Security slot
Attaches the commercial shackle lock,
manufactured by Kensington, to protect
your projector. Compatible with the Kensington
MicroSaver Security System.
(6) SERIAL IN
Connects to a computer via an RS-232C cable.
DIGITAL LINK is a technology to send image and sound signals via twisted pair cable.

The optional accessory Digital Interface Box (ET-YFB100G) and Extron's XTP transmitter are only matched
for this projector. Twisted pair cable Extender made by other companies is not sure to compatible for this
projector. For those compatible machines, please visit out website.
http://panasonic.net/avc/projector/
18
- ENGLISH
(2)
(1)
(7)
(6)

(3)
(9) (10)
(8)
(7) VIDEO IN
Connects to VIDEO input signals.
(8) AUDIO IN
Connects the audio output signals from video
equipment connected to (7) or (12) to this jack.
(9) COMPUTER AUDIO IN 1
Connects the audio output signals from a
computer connected to (1) to this jack.
(10) COMPUTER AUDIO IN 2 (MIC IN)
Connects the audio output signals from a
computer connected to (2) to this jack.
(11) VARIABLE AUDIO OUT
Outputs the audio signals input to the projector.
(12) S-VIDEO IN
Connects to S-VIDEO input signals.
Attention
When a LAN cable is directly connected to the projector,
z
the network connection must be made indoors.
(4)
(11)
(12)