Table of Contents
Advertisement
Manual PC adjust
Current mode
1 )
Press ▲▼ to select [Current mode].
2 )
Press ► or the <ENTER> button to
enter the next submenu to show
H-sync freq. and V-sync freq. of the
connected computer.
Clamp
1 )
Press ▲▼ to select [Clamp].
2 )
Press the <ENTER> button to display
the adjustment dialog box.
3 )
Press ◄► to adjust the clamp level.
When the image has dark bars, try this
z
adjustment.
Display area H
1 )
Press ▲▼ to select [Display area H].
2 )
Press the <ENTER> button to display
the adjustment dialog box.
3 )
Press ◄► to adjust the horizontal area
displayed by this projector.
Display area V
1 )
Press ▲▼ to select [Display area V].
2 )
Press the <ENTER> button to display
the dialog box.
3 )
Press ◄► to adjust the vertical area
displayed by this projector.
42
- ENGLISH
Reset
To reset the adjusted data, all adjustments will return
to their previous figures.
1 )
Press ▲▼ to select [Reset].
2 )
Press the <ENTER> button.
A confirmation box appears and then select [Yes].
z
Mode free
Deletes the values registered in [Store].
1 )
Press ▲▼ to select [Mode free].
2 )
Press ► or the <ENTER> button to
enter the next submenu.
Move the highlight to the mode that you want to
z
clear and then press the <ENTER> button.
A confirmation box appears and then select [Yes].
z
Store
Registers the adjusted values in [Store].
1 )
Press ▲▼ to select [Store].
2 )
Press ► or the <ENTER> button to
enter the next submenu.
Move the highlight to one of the Modes 1 to 10
z
in which you want to store, and then press the
<ENTER> button.
A confirmation box appears and then select [Yes].
z
Advertisement
Chapters
Table of Contents
