STEP 7
Assemble
Cover to the T-Bar.
Completion
To install in Ethernet
Make sure the Ethernet is firmly connected to a switch hub. After attaching the
Ethernet cable plug in the power adapter. If the LED turns out to be steady green after
self-test, go to next paragraph "Software Installation".
Consult with the dealer of the peripherals for correct installation.
the
Decoration
1
DI+
2
DI-
3
SW_COMMON
SW_OPEN at initial state)
to ON)
4
SW_NOPEN
0.5A, 125VAC)
- 11 -
INPUT (Max. 50mA, 12VDC)
INPUT (Initial state of DI is low)
OUTPUT
(close with SW_OPEN when set DO
OUTPUT (Max. 1A, 24VDC or
T: 886-2-82455282
F: 886-2-82455532
(open
from
www.vivotek.com