Table of Contents
Advertisement
Camera Control
On the Camera Control page, there are two main function control areas:
Camera control area
The pan and tilt functions can be controlled with these buttons. The "Left" button aims
the camera to the left; the "Right", "Up", and "Down" buttons aim the camera
accordingly. The "Home" button aims the camera to the center.
"-" and "+" buttons beside "Zoom" control the zoom widely function and zoom
telescopically.
"Pan speed" This controls the range of the horizontal movement of the camera. The
greater the value, the greater angular movement when performing the "Left" or
"Right" functions.
"Tilt speed" This controls the range of the vertical movement of the camera. The
greater value, the greater angular movement when performing the "Up" or "Down"
functions.
"Zoom speed" This controls the range of the zooming. The greater the value, the
greater viewing angle changed.
"Focus speed" This controls the range of the focus adjustment. The greater the value,
the greater adjustment.
"Auto pan/patrol speed" This defines the speed of panning and patrol, the greater
the value, the faster the speed.
Preset function area
"Disable motion detection during PTZ operation" Checking this box allows the
user to disable the motion detection function during PTZ operation. Otherwise, scene
change due to PTZ operation might be detected as motion.
"Current position" If the User wants to save the current view as a preset location,
enters a name for each of the current video view at "Current position" and click on the
"Add" button. The camera allows for ten preset locations.
* The preset function is valid only in optical zoom mode.
"Preset position" This keeps a list for preset positions. Clicking on the "Delete"
button will remove the current selected position from the preset list.
- 56 -
www.vivotek.com
T: 886-2-82455282
F: 886-2-82455532
Advertisement
Table of Contents
