Mixer Section - Yamaha AW2816 Service Manual

Mixer section

Input/output
MIC/LINE input
+48V DC phantom powering
PEAK LED
Input impedance
Nominal input level
Minimum input level
Maximum input level
MIC/LINE input
PEAK LED
Input impedance
Nominal input level
Minimum input level
Maximum input level
MIC/LINE input (Hi-Z)
Input impedance
Nominal input level
Minimum input level
Maximum input level
STEREO OUT
Output impedance
Nominal load impedance
Nominal output level
Maximum output level
MONITOR OUT
Output impedance
Nominal load impedance
Nominal output level
Maximum output level
OMNI OUT
Output impedance
Nominal load impedance
Nominal output level
Maximum output level
PHONES
Nominal load impedance
Maximum output level
DIGIT AL STEREO I/O
Option card slot
Digital I/O
Analog input
Analog output
Channel 1, 2 (balanced, XLR-type, TRS phone jack)
-3 dB (clipping level)
3 kΩ
-46 dB to +4 dB
-52 dB
+22 dB
channel 3-8 (balanced,TRS phone jack)
-3 dB (clipping level)
3 kΩ
-46 dB to +4 dB
-52 dB
+22 dB
channel 8 (unbalanced, phone jack)
500 kΩ
-46 dB to +4 dB
-52 dB
+20 dB
L, R (unbalanced, phono)
1 kΩ
10 kΩ
-10 dBV
+8 dBV
L, R (balanced, TRS phone jack)
150Ω
10 kΩ
+4 dB
+22 dB
1-4 (unbalanced, phone jack)
1 kΩ
10 kΩ
0 dB
+18 dB
(unbalanced, TRS phone jack)
8-40 Ω
100 mW + 100 mW (40 Ω load)
Coaxial (phono)
Slot × 1
MY8-AT (Adat)
MY8-TD (Tascam)
MY8-AE (AES/EBU)
MY8-AD (TRS phone jack × 8)
MY4-AD (XLR-type × 4)
AP8-AD (Apogee)
MY4-DA (XLR-type × 4)
AP8-DA (Apogee)
* 0 dB= 0.775Vrms, 0 dBV= 1.0Vrms
AW2816
5