Table of Contents
Advertisement
2.3
Registration (Pairing)
The Baby Monitor is pre-registered to your Parent Unit. You do not need to
register it again unless the Baby Unit loses its link with the Parent Unit.
To re-register your Baby Unit, or register a new Baby Unit, follow the procedures
below:
M
1. Press the
button of the Parent Unit and the menu bar will pop up.
<
2. Press the
LEFT button or
del/
the
+
3. Press the
UP button or
O
button to confirm.
/
4. Camera
button to select the desired Camera and press the
searching for a camera unit. The green audio level LED will flash rapidly
while searching.
O
5. Press the
6. Press and hold the PAIR button underneath the Baby Unit until the Parent
Unit finds the camera, beeps and the video from the camera appears.
NOTE
If a particular Baby Unit was registered previously, registering this current
Baby Unit again will overwrite the old registration.
12
>
RIGHT button until
add/
view/
-
DOWN button to select
/
/
will pop up, press the
button to confirm.
scan
menu will pop up.
+
is highlighted, and
add
, and press the
-
UP button or
DOWN
O
button to start
Getting Started
Advertisement
Table of Contents
