Table of Contents
Advertisement
1. Connect the micro USB plug of the power adapter to the Parent Unit and
the other end to a suitable electrical outlet. Only use the enclosed power
adapter (5V DC / 1500mA) with the micro USB plug.
2. Press and hold the
Parent Unit.
3. Once the Baby and Parent Units are switched on, the display on the Parent
Unit will show the video captured by the Baby Unit.
4. If there is no connection or you are out of range, the unit will beep every 5
seconds. Move the Parent Unit closer to the Baby Unit until the link is re-
established.
5. Press and hold the
finishes scrolling, to turn OFF the Parent Unit.
NOTE
The battery icon
parent unit will beep every 15 seconds. The battery needs to be recharged; it
will take16 hours to charge fully.
When charging
1. Whilst the power is OFF, and the adapter is plugged in, an adapter logo will
appear on-screen and a flashing battery logo will display for 15 seconds. The
Blue LED at the top left corner will light up; indicating that the adapter is
plugged in.
2. Whilst the power is ON, and the adapter is plugged in, the battery icon at
the top right corner of the screen will show that the battery is charging. The
Blue LED at the top left corner will light up to indicate that the adapter is
plugged in.
Getting Started
0
POWER ON/OFF button for 1 second to turn ON the
0
POWER ON/OFF button, until the progress bar
turns RED to indicate that the battery is low, and the
11
Advertisement
Table of Contents
