Printing With A Programmed Number Of Prints For Each Class (One Touch Class Mode) - Ricoh VT2100 Series Operating Instructions Manual

OPERATION
Printing With A Programmed Number Of Prints For
Each Class (One Touch Class Mode)
What is One Touch Class mode?
This feature is useful for teachers who frequently make multiple print sets
for their classes, e.g. notes, handouts, tests etc.
Using a standard print function, the teacher would have to stand by the
machine entering the number of prints and pressing the Start key for each
class. However, One Touch Class mode allows you to program the number
of students in each class into the machine beforehand. Then, whenever you
need to make print sets for several classes, set your original, select the
classes who need prints and press the Start key. Print sets will be made
containing the correct number of prints for each class.
If you have the Tape Dispenser option, print sets will be sent to the paper
delivery table separated by a slip of tape for easy separation. If you do not
have this option, the machine will stop after each set has been printed. In this
case, remove the stack from the paper delivery table and press the Start key to
start printing the next set.
You can program student numbers for up to 9 grades with 10 classes in each,
giving a maximum of 90 classes. Each class can have up to 9999 students.
47
1-1 1-2
2-1 2-2
1-3
2-4
2-3