Ricoh VT2100 Series Operating Instructions Manual page 69

Checking how many prints will be made in One Touch
Class mode
If you want to find out the programmed class numbers before making prints,
do the following steps after step 6 (page 58) or step 5 (page 60):
Flip over the plate so you can
1
see the "<" and ">" keys.
Hold down the Reset and Stop
2
keys simultaneously and use the
"<" and ">" keys to scroll through
the classes.
The machine will beep when you
reach the end or beginning of the list.
If Print Program Class is set to "Last"
(see page 103), pressing the " <" key
shows classes from the last class
set.
OPERATION
4 - 1 25
Grade
Class
Number of students
in the class
62