Stamping Function-Printing Preset Messages On Your Prints - Ricoh Priport JP5000 Operating Instructions Manual

OPTIONAL FUNCTIONS
Stamping Function—Printing Preset
Messages On Your Prints
2
R
One of the following 3 messages can
be stamped on prints.
Confidential
Priority
Preliminary
Limitation
The optional memory board is re-
quired.
This function cannot be used with
User Stamping.
Only one message can be stamped
at a time.
Note
You can change some Stamping
Function settings (preset stamping
position, size, or density) with the
user tools. See "Type", "Size",
"Stamp Density", "Stamp Posi-
tion", in ⇒ P.144 "5. Stamp".
The message "Confidential" is se-
lected as a default. You can change
this default setting with the user
tools. See "Type" in ⇒ P.144 "5.
Stamp".
120
A
Priority
R
Preliminary
Confidential
GRSTAM0E
B
C
D
E
Press the { { { { Stamp} } } } key.
Select [Stamp] with the [← ← ← ← ], [→ → → → ],
{~}, or { { { { } } } } } } } } key.
Press the [OK] key.
Select the desired message with
the [← ← ← ← ], [→ → → → ], { { { { ~ ~ ~ ~ } } } } , or { { { { } } } } } } } } key.
Press the [OK] key.
TPES330E
TPES530E
TPES530E