Ricoh Aficio MP171 Field Service Manual page 189

[Paper Buckle]
This SP eliminates the amount of buckle at the registration roller.
• When paper is fed from the paper cassette, before the registration rollers start to
rotate the leading edge of the paper stops and hits the nip of the registration
rollers and stops.
1003
• The registration rollers remain idle long enough to stop the paper from skewing
in the paper path.
• This SP adjusts the amount of time that the registration rollers remain idle to
reduce paper buckle.
• Raise this setting to lengthen the amount of time that the paper pauses at the nip
of the registration rollers if you notice a large amount of skew in printouts.
1-003-011 By-pass: Plain
1-003-012 By-pass: Thick
1-003-013 By-pass: Envelope
1-003-021 Tray1: Plain
1-003-022 Tray1: Thick
1-003-023 Tray1: Envelope
1-003-031 Tray2: Plain
1-003-032 Tray2: Thick
1-003-061 Duplex: Plain
1-003-062 Duplex: Thick
[Flicker Control]
1101
Sets the flicker control (0: Disable, 1: Enable).
1-101-001 Flicker Control
[Print Target Temp]
1105
Adjusts the target fusing temperature for each paper type. "C" indicates the center of
the roller.
E
E
E
[-5 to 5 / 0 / 1 mm/step]
E
E
E
E
E
[-5 to 5 / 0 / 1 mm/step]
E
E
[0 or 1 / 0 / 1 /step]
E 0: Disabled
1: Enabled
Main SP Tables-1
21