Page 1
Model: XP-R30 HANDLING INSTRUCTIONS Before using this XINPU Rotary hammer, please carefully read though these HANDLING INSTRUCTIONS. Ensure that you know how the machine works, and how it should be operated. Maintain the machine in accordance with the instructions, and make certain that the machine work correctly, please store this instriation and other enclosed documents with the machine together.
Page 3
Tool SDS-plus shank Limit set Flex Sheath locked Pushbutton Function Knob Knob Support Side handle Papilionaceous Short Bolt (10) Orientation Staff Guage (11) Core bit (12) Core bit shank (13) Drill bit (14) Core bit tip (15) Oil Tank Cover...
list: General Power Tool Safety Warnings Special Warning for Electric hammer Applications Technical Data Accessories Applications Name of the parts Prior to operation Operation Maintenance and Service Environment General Power Tool Safety Warnings WARNING : Read all safety warnings and all instructions. Failure to follow all warnings and instructions may result in electric shock, fire and/or serious injury.
Page 5
3) Personal safety a) Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury. b) Use safety equipment.
• Do not touch the bit during or immediately after operation. The bit becomes very hot during operation and could cause serious burns. Technical Data Machine Type XP-R30 Rated Voltage 230V~ Frequency 50Hz Rated input...
6. Grease(30g) Optional accessories are subject to change without notice. APPLICATIONS ○ Drilling holes in concrete ○ Drilling anchor holes ○ Crushing concrete, chipping, digging, and squaring (by applying optional accessories Name of the parts Flex Sheath Function Knob Decelerate Box Oil Tank Cover Switch Main Handle...
3. Extension cord When the work area is removed from the power source, use an extension cord of sufficient thickness and rated capacity. The extension cord should be kept as short as practicable. 4. Install tool (Fig.1) CAUTION To prevent accidents, make sure to turn the switch off and disconnect to the plug from the receptacle. NOTE:...
Page 10
(b) Align ▲ of the function knob and of the knob support as illustrated in Fig. 6. (c) Release the locked Pushbutton to lock the function knob. (2) Mount the tine chisel or flat chisel. (3) Press the push button, turn the function knob to middle of “ ”...
Before replenishing the grease, turn the power off and pull out the power plug. (1) Remove the oil tank cover and wipe off the grease inside.(Fig. 13) (2) Supply 30g of XINPU Electric Hammer Grease (Standard accessory, contained in tube) to the crank case.
Need help?
Do you have a question about the XP-R30 and is the answer not in the manual?
Questions and answers