Battery Charging; Use For Battery; Battery Capacity Indication - NEC N5105 User Manual

1.1.2

Battery charging

Insert the joint of the charger into the bottom of the mobile phone.
Insert the charger into the power supply. At this time, a mark standing for charging (see chapeter 1.4) will
appear and means the battery in the charging.
When the charging mark is still (and prompt charging is finished) , then which means the charging is
finished. During the charging, the battery, mobile phone and charger will become heated, which is
normal phenomena.
After the charging is finished, turn off the power supply and pull off the charger.
Warn：
When charging, the phone must be placed at the ventilated site with the
temperature between ＋5℃ and ＋40℃ and must use the charger provided by
the provider. When using the charger without permission, it is possible to result
in danger, moreover which violates the permission and maintenance guarantee
terms for the mobile phone.
The regulate charging temperature range is from 0℃ to 45℃, if it is beyond the
range, please do not use the charging device.
Note: These pictures may not be exactly the same as the real ones and are for reference only.
Please follow that on real ones.
1.1.3

Use for battery

The phone idle duration provided by the provide is based on the ideal work environment. In the
practical use, the battery work duration will vary with the different network state, work environment
and use mode.
Please dispose of the batteries following the local regulations (Recycle e.g.),The
batteries should not be disposed of like general garbage.
1.1.4

Battery capacity indication

When the mobile phone is in power on mode, the battery capacity level displays at the right and top corner of
the screen. The residual power capacity is represented by four levels of indication bars.
User Manual for NEC N5105
第 13 页