The Battery Charge Indicator; Charging And Recharging The Battery - NEC TalkTime Max 962 Owner's Manual

Hide thumbs

Table Of Contents

Table of Contents

The Battery Charge Indicator can be accessed

by pressing the [FCN] key after power has

been applied to the phone. The display screen

indicates the battery charge level ranging from

E to F. E representing low battery and F

representing full battery.

When the battery charge falls to a preset

level the phone displays a warning message;

RECHARGE BATTERY, and an audible double

beep will sound 6 times at 10-second intervals

and then automatically turn itself off.

CHARGING AND RECHARGING THE BATTERY

Charging the battery can be accomplished two ways.

(A) By direct connect of the AC Adapter to the charging jack

of the phone.

(B) By placing the phone into the charging stand.

1. Plug the AC Adapter into a standard

110V AC outlet.

2. Insert the DC plug into the phone

battery jack.

3. With power on, display shows:

1. Plug the AC Adapter into a standard 110V AC outlet.

2. Insert the DC plug into the charging stand jack.

3. Place the phone in the charging stand.

(A)

Note: Recharging of the battery usually takes approximately 10 hours.

A new battery must be fully charged before being

used for the first time.

Batteries last longer and perform better if allowed to discharge fully at least once a

week. You can do this by leaving the phone switched on overnight, or until the

message RECHARGE BATTERY is displayed and the phone shuts itself off.

NOTE: If the battery is too hot or cold, charging will be inter-rupted until the

battery reaches a normal temperature.