Skil 0250 Original Instructions Manual page 11

a
Brushless cordless line trimmer
INTRODUCTION
This tool is intended for the cutting of grass and weeds
•
under bushes as well as on slopes and edges that can
not be reached with a lawn mower
• This tool is not intended for professional use
• Check whether the packaging contains all parts as
illustrated in drawing 2
• When parts are missing or damaged, please contact your
dealer
• Read this instruction manual carefully before use
and save it for future reference 3
• Pay special attention to the safety instructions
and warnings; failure to follow these may result in
serious injury
TECHNICAL DATA 1
TOOL ELEMENTS 2
Safety switch
A
B On/off switch trigger
C Guide handle
D Handle adjustment knob
E Speed selector
F Hinge
G Battery level indicator
H Spool cover release button
J Trimmer guard
K Line cutting blade
Arrow
L
M Storage rail
N Storage adapter
P Spool cover
Spool hole
Q
R Ventilation slots
SAFETY
GENERAL
• This tool can be used by
children aged 8 and above
and by persons who have
physical, sensory or mental
limitations or a lack of
experience or knowledge if a
person responsible for their
safety supervises them or has
instructed them in the safe
operation of the tool and they
understand the associated
dangers (otherwise, there is a
danger of operating errors and
injuries)
• Supervise children (this will
ensure that children do not
0250
play with the tool)
• Cleaning and user
maintenance of the tool shall
not be made by children
without supervision
• Be familiar with the controls and the proper use of the
tool
• The user is responsible for accidents or hazards
occurring to other people or their property
• Use only accessories and replacement parts
recommended by SKIL
• Never mount metal cutting elements onto this tool
PERSONAL SAFETY
• Keep hands and feet away from the cutting line while
trimming, especially when switching on the tool
• Always wear eye protection, long trousers and sturdy
shoes when operating the tool
• Never operate the tool in the direct vicinity of persons;
stop using the tool when persons (especially children) or
pets are nearby
• Never operate the tool when you are tired, sick or under
the influence of alcohol or other drugs
BEFORE USE
• Only use the tool in daylight or with appropriate artificial
lighting
• Never operate the tool with a damaged cutting guard or
without the cutting guard mounted
Check the functioning of the tool before each use and
•
after any impact; in case of a defect, have it repaired
immediately by a qualified person (never open the tool
yourself)
• Before use, thoroughly inspect the cutting area and
remove any object that the tool may sling during cutting
(such as stones, loose pieces of wood, etc.)
DURING USE
• Avoid using the tool in bad weather conditions, especially
when there is a risk of lightning
• Do not use the tool on wet lawns
• Keep proper balance and footing at all times; do not
overreach
Operate the tool at a walking pace only (do not run)
•
• The cutting line continues to rotate for a short time
after the tool is switched off
• Do not cut grass which is not on the ground (e.g. on walls
or rocks)
• Do not cross roads or gravel paths with the tool still
running
• Do not get distracted and always concentrate on what
you are doing
• Always switch off the tool and remove the battery
- whenever leaving the tool unattended
- before clearing jammed material
- before checking, cleaning or working on the tool
- after striking a foreign object
- whenever the tool starts vibrating abnormally
• Always ensure that the ventilation openings are kept
clear of debris
AFTER USE
• Store the tool indoors in a dry and locked-up place, out
of reach of children
- store the battery pack separately from the tool
11