Table of Contents
Advertisement
I/O Setup Menu
I/O Setup Menu manages your input/output source signals to their corresponding channels, please refer to the following
steps for manual setup or adjustments
Channel Setup
Default Channel assignment:
The CH1 to B matches cross-points button 1 to B.
CH1: SDI IN 1
(S1)
CH6: Digital IN 2
CH7: Digital IN 3
(D2)
Corresponding Button/Channel to Channel
Source Selection
Selected Source is taken by another Channel
Override a Channel Input
CH2: SDI IN 2
CH3: SDI IN 3
(S2)
CH8: Digital IN 4
(D3)
Use ← → to select I/O SETUP option.
●
Use ↑ ↓ to select "CHANNEL SETUP"; press "ENTER"
●
to confirm selection
CH4: SDI IN 4
(S3)
(S4)
CH A: Blank
(D4)
(X)
Available Selections:
● Digital Interface In 1~4 (D1 ~D4): Interface Input
. ource 1 through 4.
● SDI IN 1~4 (S1~S4)
● Multi-Zoom 1~8 (M1~M8): Reserve space for Multi-Zoom
composing; maximum 8; only assignable from Multi-Zoom
composing.
● DSK: Contents of this channel will be displayed when DSK
is activated.
● Disable (X): The cross-point button is not assigned (No
function).
Channel Setup:
1.
Use directional buttons (←→) to select a channel for
configuration, cursor location is identified with the Blue button
or directly pressing corresponding PST/EFFECT keys.
2. Use SEL knob to select input source from the top menu; if
selected source is already taken by other channel, overriding
will leave the other channel input blank; press ENTER to
confirm selection.
41
AV800HD
CH5: Digital IN 1
(D1)
CH B: DSK
English
Advertisement
Table of Contents
