Output Scaling
As to input scaling, you can manually adjust the output scaling by following the steps listed below.
Setup Conditions
The prerequisite conditions for output scaling adjustment are as followed.
Set joystick to output scale mode by pressing Scale/Size SEL button to "OUTPUT".
●
Setup Menu is closed.
●
Output Scale Adjustment
PVW
CH1
CH2
CH5
CH6
CH6
DSK
Output Scaling Adjustment
PVW
CH1
CH2
CH5
CH6
CH6
DSK
PGM
Output-Scale Completion
PGM
CH3
CH4
CH4
CH7/A
CH8/A
CH7/A
CH8/B
PGM
CH3
CH4
CH4
CH7/A
CH8/A
CH7/A
CH8/B
1. Press Scale/Size "SEL" button until "OUTPUT" LED
indicator is lit; PGM screen will be replaced by Scaling
Adjustment Screen (See Scaling Adjustment Screen
section).
Note: Scale size will automatically change to default
size when output scale is enabled.
2. Use the "SIZE" to adjust image size:
Clockwise: Increase size. Maximum up to 10X
●
of original image.
Counter Clockwise: Decrease size. Minimum up
●
to original image size.
3.
Use the "POSITION" joystick to position the
viewing center location.
Over-scaled: Viewable area window can be
●
moved around the total image area.
4. Press "ENTER" to complete and exit the adjustment;
image of PGM output will now convert to modified effect
with PGM label border changed to red.
5. To cancel output scaling just hold down the ESC
button for 3 seconds during output scale adjustment
and the PGM label border will return to Black.
35
AV800HD
English