A SYSTEMS AV800HD User Manual page 3

IMPORTANT NOTES
Read First!
Prior to the operation of this unit, please thoroughly
read through the Owner's Manual in its entirety,
these sections provide important and comprehensive
information concerning the proper operation of this
unit.
The Owner's Manual should be saved and kept for
future use and references.
The digital version of this manual is available online
at Asystems' website for download.
Power Supply
Do not connect this unit to same electrical outlet
●
that is being used by an electrical appliance that
is controlled by an inverter or a motor (such as a
refrigerator, washing machine, microwave oven, or
air conditioner).
Depending on the way in which the electrical
appliance is used, power supply noise may cause
this unit to malfunction or may produce audible
noise. If it is not practical to use a separate
electrical outlet, connect a power supply noise
filter between this unit and the electrical outlet.
To prevent malfunction and equipment failure,
●
always make sure to turn off the power on all your
equipment before you make any connections.
Although the LCD and LEDs are switched off when
●
the unit is turned off, this does not mean that the
unit has been completely disconnected from the
source of power. If you need to turn off the power
completely, first turn off the unit's switch, then
unplug the power cord from the power outlet. For
this reason, the outlet into which you choose to
connect the power cord's plug should be one that
is within easy reach and readily accessible.
Placement
This device may interfere with radio and television
●
reception. Do not use this device in the vicinity of
such receivers.
Noise may be produced if wireless communications
●
devices, such as cell phones, are operated in the
vicinity of this unit. Such noise could occur when
receiving or initiating a call, or while conversing.
Should you experience such problems, you should
relocate such wireless devices so they are at a
greater distance from this unit, or switch them off.
● Do not expose the unit to direct sunlight, place
it near devices that radiate heat, leave it inside
an enclosed vehicle, or otherwise subject it to
temperature extremes. Excessive heat can deform
or discolor the unit.
When moved from one location to another where
●
the temperature and/or humidity is very different,
water droplets (condensation) may form inside
the unit. Damage or malfunction may result if you
attempt to use the unit in this condition. Therefore,
before using the unit, you must allow it to stand
for several hours, until the condensation has
completely evaporated.
Depending on the material and temperature of the
●
surface on which you place the unit, its rubber feet
may discolor or mar the surface. You can place
a piece of felt or cloth under the rubber feet to
prevent this from happening. If you do so, please
make sure that the unit will not slip or move
accidentally.
Do not put anything that contains water on this
●
unit. Also, avoid the use of insecticides, perfumes,
alcohol, and nail polish, spray cans, etc., near the
unit. Swiftly wipe away any liquid that spills on the
unit using a dry, soft cloth.
1
AV800HD
English