Trip Computer Screen - Uniden TRAX353 Owner's Manual

How Do I Use It?
Speed Limit
Most of the fields on this screen have a
shows whether the field it is attached to is shown on the map as a Trip Data.
It also shows the position of the data as follows:
Symbol Description
This value is not shown on the map screen.
This value appears on the map screen in the Trip Data area.
This is the value at the top.
This value appears on the map screen in the Trip Data area.
This is the value in the middle.
This value appears on the map screen in the Trip Data area.
This is the value at the bottom.

Trip Computer screen

The Trip Computer screen provides collected trip data. It can be opened
Page 88
Shows the speed limit of the
current street if the map contains
it.
If you tap the previous button,
this one replaces it.
Tap this field to show
it on the map screen
in one of the Trip Data
fields.
Opens a new screen
with three resettable
Trip Computers.
Tap this button to
change the content of
the Route Data fields
to show information
about the next via
point.
Tap this button and
the Route Data fields
show information
about the final
destination again.
symbol next to them. This symbol