Connecting The Ac Adapter; To The Base; To The Charging Cradle (For Multi-Handset Packs Only) - Uniden 9035 Owner's Manual

Connecting the AC adapter

To the base

To avoid risk of fire and shock, only use the Uniden AAD-041S AC adapter with the base.
Connect the AC adapter to the
DC IN 9V jack on the bottom
of the base.
Don't put any power cord
where it people might trip
over it or step on it. If a
power cord becomes
chafed or worn out, it can
create a fire or electrical
hazard.

To the charging cradle (for multi-handset packs only)

Use only the Uniden AAD-600S AC adapter with the charging cradle.
Route the cord Route the cord
through the molded through the molded
wiring channel. wiring channel.
DECT ELITE OM.indb 7
7
Connect the AC
adapter to a
standard 240V
AC wall outlet.
Connect the Connect the AC AC
adapter to a adapter to a
standard 240V standard 240V
AC wall outlet. AC wall outlet.
13/3/08 3:16:57 PM