Adjusting the Ringer, Earpiece and Speaker Volume
Adjusting the Ringer Volume
You can choose from four ringer volume settings (off, low, medium, and high)
separately on each handset or the base.
1)
With the phone in standby, press
volume level and the station sounds the ringer at that level.
2)
Use
[
] to make the ringer volume louder or [
completely off.
3)
When you hear the ringer volume level you want to use, stop pressing keys.
The station will use the new ringer volume starting with the next incoming call.
Note: If you set the ringer volume to OFF, the station won't ring. The other stations will ring according to their
individual settings.
Muting the Ringer (One call only)
While the phone is ringing, press [
ringer for this call. The phone will ring again on the next call. (The handset must be off the cradle to mute the ringer.)
Adjusting the Earpiece Volume
You can choose from six volume levels for the handset earpiece. To adjust the earpiece volume while on a call,
press [
] (to make it louder) or [
earpiece.
DSS8955 OM.indb 35
[
] or [
]. The display shows the current
] to make it softer or turn it
/mute] or [ ] on the handset, or [clear/mute] or [
] (to make it softer). The handset display shows the current volume level for the
35
35
] on the base to mute the
28/7/08 5:20:58 PM