Connecting The Ac Adapter; To The Base; To The Charging Cradle (For Multi-Handset Packs Only) - Uniden DECT2035 Owner's Manual

Connecting the AC adapter

To the base

To avoid risk of fi re and shock, only use the Uniden AAD-041S(M) adapter with the base.
Connect the AC adapter to the DC IN 9V jack Connect the AC adapter to the DC IN 9V jack
on the back of the base. on the back of the base.

To the charging cradle (for multi-handset packs only)

Use only the Uniden
AAD-600S(M) adapter
with the charging cradle.
DECT 2035+1 OM.indb 8 DECT 2035+1 OM.indb 8
Route the cord through the Route the cord through the
molded wiring channel. molded wiring channel.
Connect the AC adapter to the Connect the AC adapter to the
DC IN 9V jack as shown. DC IN 9V jack as shown.
(It may already be connected.) (It may already be connected.)
8
Don't put any power cord where it people might Don't put any power cord where it people might
trip over it or step on it. If a power cord becomes trip over it or step on it. If a power cord becomes
chafed or worn out, it can create a fire or chafed or worn out, it can create a fire or
electrical hazard. electrical hazard.
Connect the AC adapter Connect the AC adapter
to a standard 240V AC to a standard 240V AC
wall outlet. wall outlet.
Connect the AC Connect the AC
adapter to a adapter to a
standard 240V standard 240V
AC wall outlet. AC wall outlet.
15/7/08 11:59:53 AM 15/7/08 11:59:53 AM