Ac Adapter And Battery Information - Uniden DECT1363 Series User Manual

handset
1. Remove the battery cover and disconnect
the battery.
2. Let dry for at least 3 days with the battery
disconnected and the cover off for
ventilation.
3. After the handset dries, reconnect the
battery and replace the cover. Recharge the
battery fully (15-20 hours) before using.
CAUTION! DO NOT use a microwave oven to speed up the drying
process. This will cause permanent damage to the handset, base and
the microwave oven.

AC Adapter and Battery Information

• Use only the supplied AC
adapters. Be sure to use the
proper adapter for the base &
any chargers.
• Do not place the power cord
where it creates a trip hazard
or where it could become
chafed and create a fire or electrical hazard.
• Do not place the unit in direct sunlight or subject it to high temperatures.
• Fully charged, the battery should provide about 10 hours of talk time and about
7 days of standby time. For best results, return the handset to the cradle after
each call to keep it fully charged.
• When the battery gets too low, the handset shows a low battery alert. If you
hear a strange beep during a call, check the display: if you see the low battery
alert, finish your conversation as quickly as possible and return the handset to
the cradle. If the handset is in standby, none of the keys will operate.
• With normal use, the battery should last about one year. Replace the battery
when the talk time becomes short even when the battery is charged. To buy a
replacement battery, call the Parts Department listed on the front cover.
Rechargeable Nickel-Cadmium Battery Warning
• This equipment contains a rechargeable Nickel-Cadmium (Ni-Cd) battery.
Part number Part number
AC AC
Input voltage Input voltage
adapter adapter
Output voltage 8V AC @ 300mA Output voltage 8V AC @ 300mA
Part number Part number
Battery Battery
pack pack
Capacity Capacity
Base
1. Disconnect the AC
adapter to cut off
the power.
2. Disconnect the
telephone cord.
3. Let dry for at least
3 days before
reconnecting.
PS-0035 PS-0035
120V AC, 60 Hz 120V AC, 60 Hz
BT-1007 BT-1007
500mAh, 2.4V DC 500mAh, 2.4V DC
1