Table of Contents
Advertisement
When you have this
problem...
A single handset can't make
or receive calls (but other
handsets can).
A handset can make calls,
but it doesn't ring or receive
a page.
Severe noise interference.
The Caller ID does not
display.
I can't register the handset at
the base.
The handset doesn't
communicate with other
handsets.
DSS8955 OM.indb 53
•
Checking the battery pack connection (see page 6).
•
Charging the battery for 15 to 20 hours.
•
Moving the handset closer to the base.
•
Making sure the line is not in use. If an outside call is already using a line, you
cannot use that line to make another outside call.
•
Resetting the handset (see page 55).
•
Changing the handset to base code (see page 57).
•
Making sure the ringer isn't turned off (see page 35).
•
Keeping all handsets away from microwave ovens, computers, wireless LAN
station, remote control toys, wireless microphones, alarm systems, intercoms,
room monitors, fluorescent lights, and electrical appliances (see page 5).
•
Moving the base to another location or turn off the source of interference.
•
Checking to see if the call was placed through a switchboard.
•
Asking your telephone company to verify your Caller ID service is current. There
may be a problem with your Caller ID service.
•
Charging the battery for 15 to 20 hours.
•
Resetting the handset (see page 55).
•
Changing the handset to base code (see page 57).
•
Making sure that you have registered all handsets (see page 12).
•
Changing the handset to base code (see page 57).
53
Try...
28/7/08 5:21:05 PM
Advertisement
Table of Contents
