Troubleshooting - Motorola MBP483A User Manual

7. Troubleshooting

Power/Link Indicator on the Parent Unit does not come on
• Check whether the Parent Unit is powered on.
• Check whether the supplied battery pack is correctly installed and that it is
charged.
• Recharge the Parent Unit by connecting it to the power supply.
Power/Link Indicator on the Baby Unit flashes
• The Baby Unit may not be paired with the Parent Unit. Refer to section 4.8 to
pair the Baby Unit.
• The Parent Unit and the Baby Unit may be out of range with each other.
Reduce the distance between the units, but not closer than 1 metre.
• The Baby Unit may be switched off. Slide the ON-OFF switch on the Baby
Unit to the ON position.
icon on the Parent Unit flashes
• Battery pack in the Parent Unit is running low. Connect the Parent Unit to the
mains power with the supplied power adapter for recharging.
The Parent Unit beeps
• The Parent Unit may have lost connection with the Baby Unit. Reduce the
distance between the Parent Unit and the Baby Unit, but not closer than 1
metre.
• The Baby Unit may be switched off. Slide the ON-OFF switch on the Baby
Unit to the ON position.
• Battery pack in the Parent Unit is running low. Connect the Parent Unit to the
mains power with the supplied power adapter for recharging.
• The Alarm is sounding. Press any button to reset the alarm, and turn it off
from the menu if not required.
• The Temperature Alert is sounding. Check the temperature, and adjust the
alert limits, if necessary, or turn it off from the menu if not required.
22 Troubleshooting