Sharp KC-D51R Operation Manual page 41

SYMPTOM
When the Roller / Float / Tray partition was
removed.
FLOAT
1. Insert the fl oat
under this tab.
2. Inner the tab
of fl oat into
the hole.
3. Insert the tab on the
other side of the fl oat
into the hole.
AUTO RESTART
After a power failure, automatically resume
the operation when the power recovers.
ON
(with the unit OFF)
(simultaneously for more 3 sec.)
REMEDY (not a malfunction)
• Install the Roller / Float / Tray partition in order
below.
Tray partition
Humidifying tray
Float
Tab
Float
Cross-Section view
Auto Restart can be set.
• Even when the plug is unplugged or the breaker
is thrown during the operation, the operation
resumes at the previous operation mode and
settings if the power recovers.
If the , , lamp lights up
for 10 seconds, the setting is
complete.
E-17
Click
ROLLER
Fix the roller in the tray from side way.
CANCELLATION
(with the unit OFF)
(simultaneously for more 3 sec.)