Reversible-Door Assembling Method - Turbo Air MSF-23NM Service Manual

C. Remove the door hinge stop pin
TOOL TOOL TOOL TOOL TOOL
TOOL TOOL TOOL TOOL TOOL TOOL
TOOL TOOL TOOL
B. Place the door hinge stop pin and adjust the strength of the door spring.
28
REPLACEMENT OF MAIN COMPONENTS
DOOR-HINGE STOP-PIN DOOR-HINGE STOP-PIN DOOR-HINGE STOP-PIN
DOOR-HINGE STOP-PIN DOOR-HINGE STOP-PIN DOOR-HINGE STOP-PIN DOOR-HINGE STOP-PIN DOOR-HINGE STOP-PIN DOOR-HINGE STOP-PIN DOOR-HINGE STOP-PIN DOOR-HINGE STOP-PIN
DOOR-HINGE STOP-PIN DOOR-HINGE STOP-PIN DOOR-HINGE STOP-PIN
REMOVE

6-4. REVERSIBLE-DOOR ASSEMBLING METHOD

APPLIED MODEL : MSF-23NM, MSR-23NM
1. Taking apart TOP GRILL and GRILL ASSEMBLY
1) Take apart TOP GRILL
after eliminating screw connected
Upper or downward located ①
in the PICTURE (A)
2) Take apart GRILL
after eliminating the screw connected
Left and right side located ②
in the PLCTURE (A)
# Attention : Heed not to damage Electricity
wire and not to fall top-grill
from the upper.
Also be careful the sharp
edges during working.
2. Taking apart of DOOR-ASSEMBLY
1) Take apart ①~⑩ in order at the PICTURE (B)
# Attention : Heed the elasticity
when eliminating the
PIN and the weight
during taking apart
DOOR ASSEMBLY.
REPLACEMENT OF MAIN COMPONENTS
①
TOP GRILL
②
GRILL
ASSEMBLY
PICTURE A
③DOOR-HINGE
②M5✽27 SCREW
UPPER
①DOOR-HINGE
STOP PIN
④DOOR-HINGE
SHAFT-UPPER
⑤DOOR-HINGE
BUSHING
⑥DOOR
ASSEMBLY
⑦DOOR-HINGE
BUSHING
⑧DOOR-HINGE
SHAFT-LOWER
⑨M5✽27 SCREW ⑩DOOR-HINGE
LOWER
PICTURE B
29