Table of Contents
Advertisement
13. OPERATING PROCEDURES
13.4 PRINT COUNT OPERATION
Menu: REG., M.DOWN, or REWRAP
Mode: WEIGH, FIX or BY-COUNT
With this procedure, a specified number of the same labels can be issued.
Example A)
When operating in Weigh mode.
Set the number of labels.
(Max. 99 labels)
Press :
Enter the PLU #.
Press :
PLU data is saved.
Place a commodity
on the platter.
(Ex. 0.700 lb.)
MANUAL :
Batch
The label is issued with the
backing paper attached.
NOTES:
1. A batch issue means to print labels continuously with the backing paper attached. On-demand
issue means to print labels one by one.
2. To check the remaining number, press the
PRESET
Press :
COUNT
5
0
PRT
*
3
0
9
PLU
SAVE
PRT
: AUTO
*
When all the specified numbers of
the labels are being issued.
©
13- 6
1
Clear the preset count.
On-demand
The label is issued.
PLU
and the
PRESET COUNT
13.4 PRINT COUNT OPERATION
©
Remove the commodity.
C
PRT
Press :
*
key.
Advertisement
Table of Contents
