8. REMOVAL AND REPLACEMENT OF RECEIPT/LABEL
8. REMOVAL AND REPLACEMENT OF RECEIPT/LABEL
1. Open the printer cover and turn the head-up lever to the anti-clockwise.
2. Pull out the roll stopper and backing paper stopper, then remove the receip/label roll together with
the backing paper roll. You can loosen the backing paper roll by turning the take-up shaft anti-
clockwise.
Take-up Shaft
Head-up Lever
3. Put a new receipt/label roll over the media shaft and fix it with the roll stopper.
8. REMOVAL AND REPLACEMENT OF RECEIPT/LABEL
Media Shaft
8- 1
Receipt/Label Roll
Roll Stopper
Backing Paper (Labels only)
Backing Paper Stopper
Roll Stopper
Receipt/Label Roll