Table of Contents
Advertisement
13. OPERATING PROCEDURES
13.1 WEIGHING OPERATION
Menu: REG., M.DOWN, or REWRAP
Mode: WEIGH
The weigh mode is used to weigh a commodity and to issue labels. The label contains data such as a weight,
unit price (price per weight) and total price (calculated as a result of the weighing operation). The following is a
basic operation seen at the sales floor of a store or at a back room where different kinds and weights of
commodities are repacked. Pressing the
Example)
When PLU #100 and an unit price of $8.00 are set in the speed key #12.
1
Enter the PLU #.
Press :
Available only when the initial
setting # 5-6 is set to 1.
kg scale
100
g
Place a commodity
on the platter.
(Ex. 1.000 lb.)
MANUAL :
Press when canceling
the last sales.
NOTES:
1. Pressing the speed key to which no PLU data has been assigned will result in an error. In this case, press
C
the
key, then press the speed key to which PLU data has been assigned.
2. To change between AUTO and MANUAL, follow the procedure provided in section 13.9.
3. If a unit price exceeding 4 digits is obtained by multiplying by 2 or 4 (when pressing the
key), the unit price will be 0.
4.
100 g
key is available only when the scale is a kg scale or operated on kg base.
5. When the
,
1/2 lb
6. When the "compulsory tare" is selected, a tare must be subtracted in a weighing operation, otherwise an error
message "TARE REQUIRED" will be displayed when the following operation has been done:
①
Manual mode: Pressing the
②
Auto mode: Placing a commodity on the platter.
③
Floating vendor mode: Pressing the
When a "TARE REQUIRED" is displayed, refer to Section 13.6 to follow the proper weighing procedure.
VOID
0
0
PLU
lb scale
1/4
1/2
PRT
*
The label is issued
VOID
or
key is pressed, the unit price does change on the display.
1/4 lb
100 g
key.
PRT/*
key subtracts the last entry from the memory.
LB
The unit of measure can be changed for
CA/QR model only.
kg
Press the
12
speed key.
<REG.> MENU
T-BONE STEAK
: AUTO
key.
Vendor
13- 2
13.1 WEIGHING OPERATION
LB Ö kg
WEIGH
lb
UNIT/$
1.000
8.00
TEC STORE
(TEL) 0123-45-6789
(Sample label)
1/2 lb
key or
TOTAL $
8.00
1/4 lb
Advertisement
Table of Contents
