Epson C11CG04201 User Manual page 325

LCD screen message
Printer error. For details, see your
documentation.
Paper out in XX. Load paper. Paper
Size: XX/Paper Type: XX
Too many paper cassette units are
installed. Turn the power off and
uninstall the extra units. See your
documentation for details.
Cannot print because XX is out of
order. You can print from another
cassette.
You need to replace Ink Supply
Unit(s).
Paper Setup Auto Display is set to
Off. Some features may not be
available. For details, see your
documentation.
No dial tone is detected.
Failed to receive faxes because the
fax data capacity is full. Touch the
Job/Status at the bottom of the Home
Screen for details.
The combination of the IP address
and the subnet mask is invalid. See
your documentation for more details.
Condition/solution
The product may be damaged. Contact Epson for support.
Load the size and type of paper in the indicated paper source .
You can install one optional paper cassette unit. Remove any
extra units.
Turn the product off and then back on again. Reinsert the
indicated paper cassette. If the error persists, contact Epson for
support.
Replace the indicated ink packs.
AirPrint is not available when the Paper Setup Auto Display
setting is turned off. Change the Paper Setup Auto Display
setting to On.
Make sure the phone cable is connected correctly and the
phone line works. If you connected the product to a PBX (Private
Branch Exchange) phone line or Terminal Adapter, change the
Line Type setting to PBX. Use a # (hash) instead of the actual
access code when entering an outside fax number. This makes
the connection more secure. If you still cannot send a fax, turn
off the Dial Tone Detection setting. (Turning off the Dial Tone
Detection setting may cause the product to drop the first digit of
a fax number.)
Press the Job/Status button, select Printer Status, and
resolve any printer errors that prevented faxes from printing.
Make sure the product is connected to a computer or that an
external USB device is connected to the product.
There is a problem with the network connection to your product.
Set up your product on the network again.
325