Connecting Video Equipment; Video In Jack; S-Video In Connector - Toshiba TLP-261 Owner's Manual

Connecting video equipment

You can project the picture from video equipment.
Check that the power supplies for the projector and for the video equipment are off before connecting the cables.
VIDEO IN
CONTROL USB AUDIO IN
To AUDIO IN jack
Note
The S-VIDEO IN connector and VIDEO IN jack can be used independently, but the audio input jack is used for all input sources.
COMPUTER OUT COMPUTER IN
S-VIDEO IN
(Y/P /P ) (Y/P /P )
B R B R
To S-VIDEO IN connector
Be sure to connect in the proper
direction.
(Yellow) To VIDEO IN jack
Video cable
(supplied)

VIDEO IN jack

S-VIDEO IN connector

AUDIO IN jack
For use as audio signal of all input sources.
To S-video output
S-video cable
(not supplied)
Audio cable
(supplied)
CONTENTS
Video equipment
Pin plug (red)
To audio output (R)
Pin plug (white)
To audio output (L)
Pin plug (yellow)
To video output
Continued
24