Toshiba Tosvert RS485 Instruction Manual page 53

Inverter operating status 1 (FD01, FE01)
Inverter status 1 (current status): Communication Number FD01
Inverter status 1 (status immediately before the occurrence of a trip): Communication Number FE01
Bit Specifications
0 Failure FL
1 Failure
2 Alarm
3 Reserved
4 Motor section (1 or 2)
(THR 2 selection)
5 PI control OFF
6 Accelera-
tion/deceleration
pattern selection (1 or
2)
7 DC braking
8 Jog run
9 Forward/reverse run
10 Run/stop
11 Coast stop (ST=OFF)
12 Emergency stop
13 Standby ST=ON
14 Standby
15 Reserved
0
No output Output in progress
Not tripped Tripped
No alarm Alarm issued
-
Motor 1 (THR 1) Motor 2 (THR 2)
PI control PI control
permitted prohibited
Acceleration/ Acceleration/
deceleration deceleration pat-
pattern 1 (AD 1) tern 2 (AD 2)
OFF Forced DC braking
OFF Jog run
Forward run Reverse run
Stop
ST=ON ST=OFF
Not emergency Emergency stop
stop status status
Start-up process Standby
Start-up process Standby
-
52
1 Remarks
Trip statuses include 
and trip retention status.
-
AD1 :, 
AD2 :, 
Run
Standby: Initialization completed,
not failure stop status, not alarm
stop status (MOFF, LL forced
stop or forced stop due to a
momentary
ST=ON, and RUN=ON
Standby: Initialization completed,
not failure stop status, and not
alarm stop status (MOFF, LL
forced stop or forced stop due to
a momentary power failure)
-
E6581315
power failure),